request a quote
create a sketch or use a drawing of your space and measure all the areas where partitions are needed
be sure to mark entrance/exit areas and the locations of planters/lasercut panels if desired
match your dimensions by combining our different panel, stand, and planter stand options
single 3' panel: 32"
single 5' panel: 56"
single 7' panel: 80"
stand pole: 2"x 2"
stand base: 10" x 10"
square planter body width: 8"x 8"
rectangle planter body width: 8" x 32"
record the total number of each type of panel, stand, and planter stand* needed
if you need assistance with this, please submit a quote request form and include your drawing with measurements
*please read the planters info section at the bottom of this page if you want planter stands
using your layout drawing as reference, select the correct components from the online shop
double-check that the stand types and panel lengths match your drawing
make sure you have selected the correct colors, lasercut options, and planter top options
make sure the delivery address is correct and provide an on-site contact name and number for the person who will accept the delivery
be sure to choose liftgate service if needed and notify us if you have any special delivery requirements
most orders will ship LTL freight- due to the nature of freight shipping, delivery time windows may not be completely accurate
have someone on location during the expected delivery window to receive the shipment. If no one is there, the delivery can not be completed
before accepting the shipment, check it thoroughly for shipping damage
document any issues on the paperwork BEFORE the driver leaves and take photos
contact us right away if there is any shipping damage
download additional shipping information here
unpack all components and locate the instruction manual and wrench*
read the instruction manual before assembling any components
*the wrench is not needed for planter stands
assemble the pole stands and then place all stands in their correct spots BEFORE attaching panels
once the stands have been placed, attach the panels starting at either the middle or a corner
double-check the position of your partitions during assembly- it is easier to adjust the positioning before the system is fully assembled
- if you are permanently mounting your system, remove the bolt hole knock-outs and attach all the panels BEFORE bolting any bases into the ground-
enjoy your new outdoor partition system!
circle top cut-out planters are designed for a potted plant to sit inside the top cut-out
no other soil or fillers are required
square & rectangle top cut-out planters are designed to be completely filled using filler and soil
fillers use up a lot of the empty space, leaving room for soil and plants at the top